[8/19/17] Maybe you don’t want to or can’t carry a firearm. Maybe you work in an office high rise where weapons are forbidden, That doesn’t mean that you should be without means to defend yourself. Sometimes you have to be creative to exercise your right to self-defense. For just a few dollars, you can put together a concealable self-defense tool that you can carry practically anywhere for last ditch emergency use. As always, make sure to check your state and local laws to see if they’ve stripped you of the right to defend yourself in this manner. Please be aware that I am not responsible for any bodily harm or injury that may befall you or others with this tool, this is to be made and used at your own discretion.
What You Will Need:
Piece of Rubber or Jar Gripper ( I used a piece of bicycle inner tube)
Hot Glue Gun or Epoxy (if you want it a lot stronger, will take longer for epoxy to set)
File or Bench Grinder
Small Screw Driver (like for eyeglasses)
1 Sharpie Fine Point Marker
1 11/64 Drill bit (preferably a longer sized drill bit)
To disassemble the Sharpie with out marking it up take your piece of rubber to grip the cap securing the ink. You’re going to want to pull straight out instead of twisting because the cap has fine splines in it. It does take some strength.
If just a handful of our 600,000 monthly readers donated one dollar, I could easily crush my modest yearly fundraising goal of $10,000 by January 31 2018. If you value the information on this site and have the means, please consider making a donation below. Your support will help us expand, keep ads off the site and buy out any remaining advertising contracts we have with vendors. No contribution is too small and will undoubtedly go towards the many expenses this site incurs. If would like to learn more about our mission, please visit our manifesto here. Thank you so much for your support, Thomas Dishaw Editor @ Gov't Slaves